Hello Rudra
Thank you for help!
I have gone through the note and changed all the parameters suggested in the notes. But no luck
.Please see the "dev_icm" Trace file content below and suggest.
[Thr 12800] IcmWriteToConn(id=0/671): prepared to write data to partner (len = 27609)
[Thr 12800] NiIWrite: hdl 316 sent data (wrt=27609,pac=1,RAW_IO)
[Thr 12800] IcmWriteToConn: NiWrite (27609 bytes, timeout = 2000) wrote 27609,rc=0
[Thr 12800] IcmWriteToConn: net_buf_len=27609
[Thr 12800] IcmWriteToConn(id=0/671): wrote data to partner (len = 27609)
[Thr 12800] IcmNetBufFree: free netbuf: 00000000052C7140 out of 1 used
[Thr 12800] MPI<a8>3#100 FreeInbuf#1 0 3346e0 0 -> MPI_OK
[Thr 12800] IcmReadFromConn(id=0/671): request new MPI (0/0)
[Thr 12800] IcmLowOnBlocks: mpi buffer space free (cur/limit/unreserved): 0/3581/4477)
[Thr 12800] MPI<a7>5#4 GetOutbuf 0 3346e0 65536 (0) -> 000000001A174750 104857600 MPI_OK
[Thr 12800] NiIRead: hdl 316 recv would block (errno=EAGAIN)
[Thr 12800] NiIPeek: peek for hdl 316 timed out (r; 500ms)
[Thr 12800] NiIRead: raw read for hdl 316 timed out (500ms)
[Thr 12800] IcmReadFromConn: read failed with timeout: 500 -> roll out
[Thr 12800] MPI<a7>5#5 DiscardOutbuf 20 0 0 3346e0 0 0 -> 000000001A174730 MPI_OK
[Thr 12800] NiWakeupExec: send wakeup signal to 54127->64993 (sock 6560)
[Thr 12800] IcmConnRollOut: connection (id=0/671) rolled out: reason:1 role:2 timeout:300
[Thr 12800] CONNECTION (id=0/671):
used: 1, type: default, role: Client(2), stateful: 0
NI_HDL: 316, protocol: HTTP(1)
local host: 192.168.65.18:63595 ()
remote host: 192.168.65.18:9080 ()
status: READ_RESPONSE
connect time: 04.09.2015 11:21:29
(Context: 0, Role: 2)
tid: 8, mode: 0, uid: 5360
MPI request: <a8> MPI response: <a7>
request_buf_size: 0 response_buf_size: 0
request_buf_used: 0 response_buf_used: 0
request_buf_offset: 0 response_buf_offset: 0
[Thr 12800] REQ TRACE END: 0/671/1
[Thr 12800] IcmWorkerThread: Thread 8: Waiting for event
[Thr 12800] DpRqFreePendingRequests: freed 0 pending request
[Thr 776] SiSelNFCNext: sock 6564 selected (revt=r-)
[Thr 776] NiSelIListInsert: add hdl 217 [0] to sel-list (0) of set1
[Thr 776] NiSelISelectInt: 1 handles selected (0 buffered)
[Thr 776] WATCHDOG TRACE BEGIN
[Thr 776] NiIPeek: peek successful for hdl 217 (r)
[Thr 776] NiIWakeupReceive: hdl 217 received 1 bytes from 127.0.0.1:54127
[Thr 776] NiIPeek: peek for hdl 217 timed out (r; 0ms)
[Thr 776] WATCHDOG TRACE REQ: 0/671/1
[Thr 776] IcmWatchDogUpdateRollQueue(id=0/671): insert fe-nihdl 316, flags=1
[Thr 776] SiSelNFCSet: sock 8112 added to set pos 8
[Thr 776] NiSelIAddMsg: added hdl 316 to set1
[Thr 776] SiSelNFCSet: set events of sock 8112 to: r-
[Thr 776] IcmWatchDogThread: check ni handles (timeout=5000)
[Thr 776] WATCHDOG TRACE END
[Thr 776] SiSelNFCSelect: start select (timeout=5000)
[Thr 10652] Fri Sep 04 11:21:35 2015
[Thr 10652] SiSelNSelect: of 1 sockets 0 selected
[Thr 10652] IcmProxyWatchDog: check sockets (timeout=10000)
[Thr 10652] SiSelNSelect: start select (timeout=10000)
[Thr 776] Fri Sep 04 11:21:38 2015
[Thr 776] NiSelISelectInt: 0 handles selected (0 buffered)
[Thr 776] WATCHDOG TRACE BEGIN
[Thr 776] IcmWatchDogThread: Wakeup MPI Watchdog
[Thr 776] MPI<2>0#15338 WriteOOB 77030000 00000000 68270C53 F6070000 B0250C53 F6070000 000000
[Thr 776] IcmWatchDogThread: check ni handles (timeout=5000)
[Thr 11064] MPI<2>0#15339 PeekInbuf 0 0 0 (0) -> MPI_EOUTOFBAND: out-of-band message
[Thr 11064] MpiSelSelect( 0 -1 ) -> MPI_OK
[Thr 776] WATCHDOG TRACE END
[Thr 11064] MPI WATCHDOG TRACE BEGIN
[Thr 776] SiSelNFCSelect: start select (timeout=5000)
[Thr 11064] IcmMpiWatchDogThread: Wakeup OOB received
[Thr 11064] MPI<2>0#15340 ReadOOB 77000000 00000000 00000000 00000000 A0739B02 00000000 000000 -> MPI_OK
[Thr 11064] IcmMpiWatchDogThread: call MpiSelSelect
[Thr 11064] MPI WATCHDOG TRACE END
[Thr 11064] MPI<2>0#15341: GetInbuf: check avail. buffers 0 0
[Thr 11064] MPI<2>0#15341 PeekInbuf 0 0 0 (0) -> MPI_EAGAIN: resource busy
[Thr 11064] MpiSelect: 0 waiting for events
Thank you
Regards
Srinivas